This is right if
A product label with real dimensions, a real container and a known production method.
Artwork for a specific piece
A label drawn to the actual die.
Label artwork is laid against the real container and die, accounting for wrap, seams, bleed and the stock beneath the ink, so the label that arrives fits the bottle, jar or tin it was made for.
- Guide price
- from US$ 450
- Scope
- one SKU
- Turnaround
- Quoted with the project
Guide price. Every project is quoted — tell us what it is for and we come back with a number. Half of every design fee is credited against your first print order over US$ 600.
Clover · three spot plates
From a real project · Clover
Five colours + halftone → Three spot plates
Five colours butted edge to edge would have shown white at every join. Rebuilt as three spot plates with a screen doing the work, the joins are deliberate and the coral is identical on every reprint.
How it runs
Four steps, each one on paper.
- 01
Start with the real piece
Send the container, or its exact dimensions, and the die if one exists. We measure the wrap before layout.
- 02
See it on the stock
The label shown on the container at actual size, with the seam and stock visible.
- 03
Refine and resolve
One chosen direction is refined against your feedback and the limits of the selected process.
- 04
Receive the production files
Outlined vector masters, process separations and a spec sheet naming what the press needs to hold.
The handoff
What you get.
- Label artwork on the die line
- Bleed and safety set to the container
- Spot separations and white underprint where needed
- Variant files per SKU on request
- Spec sheet
.ai.pdf
Is this the right service?
When you need this. When you don't.
Production standards
The details that matter here.
Bleed around the die
Carry colour beyond the cut line and keep important type inside its safety margin.
Die-cut shapes →
A gap at the seam
A wrap label needs a planned overlap or gap; measure the actual container, not a flat screen mockup.
Print size guide →Questions before we start.
Can you design a range of labels across SKUs?
Yes. We build one master and set each variant against it, so colour and type stay consistent across the range. Quoted per SKU.
Do I need a white underprint?
On clear or metallic stock, yes, wherever the colour needs to read as opaque. We draw it as its own separation.
Do I own the finished files?
Yes. The approved artwork and its production files are yours. Fonts licensed from others remain subject to their licence.
Updated September 2026
Also in this family
Business Card Artwork
from US$ 295Two sides resolved against the exact trim, finish and stock, with every small detail set to survive the press.
Stationery Suite Artwork
from US$ 650A card, letterhead and envelope with one consistent mark, thoughtful spacing and separations that make production simple.
Wedding Suite Artwork
from US$ 950Invitation, reply, details and envelope considered together so the whole suite arrives as one clear gesture.