Oranges · spot ink
PMS 021 C
Pantone® 021 Coated: Pantone 021 on coated stock
Translucent: will not cover dark stock. Printers write it PMS 021 C; brand guidelines usually write it Pantone® 021 Coated. Same ink, same plate: the letter is the paper it lands on. On uncoated stock the same colour is PMS 021 U, and it does not look the same.
- High-visibility brand orange
- Single-colour work
On-screen approximation: not a colour-accurate reference. Match to a physical PANTONE® chip before you sign off.
Coated vs uncoated, honestly
See 021 C and 021 U side by sideThe same ink is not the same colour on the two stocks. On coated sheets the ink sits on a sealed surface: denser, brighter, sharper edges. On uncoated the fibres absorb it: softer, duller, slightly lighter, and warm colours lose the most punch. Some colours change character outright: brights go chalky, deep navies go grey-blue.
| Stock | Reference | What you get |
|---|---|---|
| Coated | 021 C | Denser and brighter. Ink sits on a sealed surface, edges stay sharp. |
| Uncoated | 021 U | Softer and less saturated. Fibres absorb the ink; expect a step down in punch. |
How it behaves in production
- Pantone 021 is the reason spot colour exists: no CMYK build reaches it, and every attempt lands muddy.
- It is a strong, opaque-feeling ink for its family, so it survives uncoated better than a bright yellow would. It still loses roughly a step of brightness.
On dark stock
Offset and letterpress inks are translucent. On a dark or coloured stock a light ink will not cover: it sinks into the sheet and reads tone-on-tone. For light colour on dark paper the answer is foil stamping or an opaque screen pass, never a straight PMS hit.
See the foil directoryThe paper matters as much as the ink
A CMYK build of a spot colour is an approximation, not the colour. It matters most on large flat solids, on brand-critical marks, and in the brights and deep blues where process simply cannot reach. It matters least in small type and inside photography.
Browse the paper directoryCommon questions
- What does Pantone 021 look like on uncoated paper?
- Softer, duller and a touch lighter than the coated chip. Uncoated fibres absorb the ink instead of letting it sit on a sealed surface, so saturation drops across the board. The uncoated swatch here is modelled from the coated approximation: order the sample kit, or ask us to curate inks after you order.
- Can you print Pantone 021 on dark or coloured stock?
- Not as a standard ink hit. Pantone 021 is translucent, so on dark stock the paper colour comes through and the result is tone-on-tone. For this colour on dark paper we foil stamp or run an opaque screen instead.
- Can Pantone 021 be matched in CMYK?
- Not reproducible in process. If the brand is 021, it is a spot ink or a compromise.
PANTONE® is a registered trademark of Pantone LLC. Print Peppermint is not affiliated with or endorsed by Pantone LLC. Codes are referenced to identify the inks we print.
Pairs beautifully with
Three combinations that hold up on press. Open one and the Studio starts with the stock, the foil and the ink already locked in.
Pantone 021 on Iridescent metal , MATTE
Pantone 021 on Iridescent metal , MATTE. Ink is translucent: on a soft angle-shifting spectrum, diffused sheet the printed colour shifts toward the paper. Sign off against a printed sample, not the chip.
Compatibility matrix
Start this combinationPantone 021 on Wild Brown
Pantone 021 on Wild Brown. Ink is translucent: on a warm chocolate brown sheet the printed colour shifts toward the paper. Sign off against a printed sample, not the chip.
Compatibility matrix
Start this combinationPantone 021 on Acquerello Avorio
Pantone 021 on Acquerello Avorio. Ink is translucent: on a avorio, uncoated, felt-marked on both sides (watercolour-style felt texture) sheet the printed colour shifts toward the paper. Sign off against a printed sample, not the chip.
Compatibility matrix
Start this combination