New: Peppermint Studio — Try it →

    Pantone 806 revestido vs não revestido

    A mesma tinta, duas superfícies. As cores fluorescentes perdem visivelmente o brilho em papel não revestido: as fibras dispersam precisamente a luz que as faz parecer néon. Translúcido: não cobre papel escuro.

    Revestido

    806 C

    Não revestido · modelled

    806 U

    On-screen approximation: not a colour-accurate reference. Match to a physical PANTONE® chip before you sign off.

    O que muda realmente

    RevestidoNão revestido
    Referência806 C806 U
    SuperfícieSelado. A tinta fica sobre o revestimento.Fibra aberta. A tinta penetra e espalha-se ligeiramente.
    SaturationIntensidade total: esta é a amostra de onde saiu a maioria dos guias de marca.Down roughly 27% in apparent chroma. Fluorescents lose a noticeable amount of their glow on uncoated stock; the fibres scatter exactly the light that makes them read as neon.
    DetailLinhas finas e texto pequeno mantêm-se nítidos.Conte com algum ganho de ponto; reservas finas podem fechar.
    Ideal paraDetalhes em rosa néonLetterpress, algodão e papéis texturados, quando a suavidade é o objetivo.

    The same ink is not the same colour on the two stocks. On coated sheets the ink sits on a sealed surface: denser, brighter, sharper edges. On uncoated the fibres absorb it: softer, duller, slightly lighter, and warm colours lose the most punch. Some colours change character outright: brights go chalky, deep navies go grey-blue.

    Perguntas frequentes

    806 C é a mesma cor que 806 U?
    No. They are the same ink formulation printed on two different surfaces, and PANTONE® publishes them as two separate chips for that reason. Fluorescents lose a noticeable amount of their glow on uncoated stock; the fibres scatter exactly the light that makes them read as neon. If your brand guideline names only one of them, name the stock too: otherwise the press has to guess.
    Qual devo escolher?
    Specify the one that matches the paper you are actually printing on. If the job runs on uncoated stock, sign off against 806 U: approving the C chip and then printing uncoated is the single most common colour complaint we see.
    Consegue que a versão não revestida corresponda à amostra revestida?
    Not exactly, no. We can push density a little, and on some colours a double hit closes part of the gap, but the coating is doing the work: no amount of ink turns an uncoated sheet into a coated one. Where the brand colour is non-negotiable, we would look at a coated stock, a spot varnish under the solid, or foil.
    Does Pantone 806 cover dark paper on either stock?
    Offset and letterpress inks are translucent. On a dark or coloured stock a light ink will not cover: it sinks into the sheet and reads tone-on-tone. For light colour on dark paper the answer is foil stamping or an opaque screen pass, never a straight PMS hit.

    PANTONE® é uma marca registada da Pantone LLC. A Print Peppermint não é afiliada nem apoiada pela Pantone LLC. Os códigos são referidos para identificar as tintas que imprimimos.