Pantone 806 estucado o sin estucar
La misma tinta, dos superficies. Los fluorescentes pierden buena parte de su brillo en papel no estucado: las fibras dispersan justo la luz que los hace parecer neón. Translúcido: no cubre papel oscuro.
Estucado
806 C
Sin estucar · modelled
806 U
On-screen approximation: not a colour-accurate reference. Match to a physical PANTONE® chip before you sign off.
Qué cambia realmente
| Estucado | Sin estucar | |
|---|---|---|
| Referencia | 806 C | 806 U |
| Superficie | Sellado. La tinta queda sobre el estucado. | Fibra abierta. La tinta penetra y se expande ligeramente. |
| Saturation | Intensidad plena: es la muestra de la que se eligieron la mayoría de las guías de marca. | Down roughly 27% in apparent chroma. Fluorescents lose a noticeable amount of their glow on uncoated stock; the fibres scatter exactly the light that makes them read as neon. |
| Detail | Trazos finos y letra pequeña se mantienen nítidos. | Cuenta con algo de ganancia de punto; los calados finos pueden cerrarse. |
| Ideal para | Detalles en rosa neón | Letterpress, algodón y papeles texturizados cuando lo que importa es la suavidad. |
The same ink is not the same colour on the two stocks. On coated sheets the ink sits on a sealed surface: denser, brighter, sharper edges. On uncoated the fibres absorb it: softer, duller, slightly lighter, and warm colours lose the most punch. Some colours change character outright: brights go chalky, deep navies go grey-blue.
Preguntas frecuentes
- ¿806 C es el mismo color que 806 U?
- No. They are the same ink formulation printed on two different surfaces, and PANTONE® publishes them as two separate chips for that reason. Fluorescents lose a noticeable amount of their glow on uncoated stock; the fibres scatter exactly the light that makes them read as neon. If your brand guideline names only one of them, name the stock too: otherwise the press has to guess.
- ¿Cuál debo elegir?
- Specify the one that matches the paper you are actually printing on. If the job runs on uncoated stock, sign off against 806 U: approving the C chip and then printing uncoated is the single most common colour complaint we see.
- ¿Podéis hacer que la versión sin estucar coincida con la muestra estucada?
- Not exactly, no. We can push density a little, and on some colours a double hit closes part of the gap, but the coating is doing the work: no amount of ink turns an uncoated sheet into a coated one. Where the brand colour is non-negotiable, we would look at a coated stock, a spot varnish under the solid, or foil.
- Does Pantone 806 cover dark paper on either stock?
- Offset and letterpress inks are translucent. On a dark or coloured stock a light ink will not cover: it sinks into the sheet and reads tone-on-tone. For light colour on dark paper the answer is foil stamping or an opaque screen pass, never a straight PMS hit.
PANTONE® es una marca registrada de Pantone LLC. Print Peppermint no está afiliada a Pantone LLC ni cuenta con su respaldo. Los códigos se citan para identificar las tintas que imprimimos.