Greens · spot ink
PMS 5535 C
Pantone® 5535 Coated — PANTONE 5535 on coated stock
Translucent — will not cover dark stock. Printers write it PMS 5535 C; brand guidelines usually write it Pantone® 5535 Coated. Same ink, same plate — the letter is the paper it lands on. On uncoated stock the same colour is PMS 5535 U, and it does not look the same.
- Heritage / hunter green
- Letterpress on cotton
- Wedding suites
On-screen approximation — not a colour-accurate reference. Match to a physical PANTONE® chip before you sign off.
Coated vs uncoated, honestly
See 5535 C and 5535 U side by sideThe same ink is not the same colour on the two stocks. On coated sheets the ink sits on a sealed surface: denser, brighter, sharper edges. On uncoated the fibres absorb it: softer, duller, slightly lighter, and warm colours lose the most punch. Some colours change character outright — brights go chalky, deep navies go grey-blue.
| Stock | Reference | What you get |
|---|---|---|
| Coated | 5535 C | Denser and brighter. Ink sits on a sealed surface, edges stay sharp. |
| Uncoated | 5535 U | Softer and less saturated. Fibres absorb the ink; expect a step down in punch. |
How it behaves in production
- Our most-run green by a wide margin — the muted, slightly grey 'heritage' green people mean when they say hunter green.
- Because it is already desaturated, it survives the move to uncoated better than almost any other green. What you see on the coated chip is close to what you get on cotton.
On dark stock
Offset and letterpress inks are translucent. On a dark or coloured stock a light ink will not cover — it sinks into the sheet and reads tone-on-tone. For light colour on dark paper the answer is foil stamping or an opaque screen pass, never a straight PMS hit.
See the foil directoryThe paper matters as much as the ink
A CMYK build of a spot colour is an approximation, not the colour. It matters most on large flat solids, on brand-critical marks, and in the brights and deep blues where process simply cannot reach. It matters least in small type and inside photography.
Browse the paper directoryCommon questions
- What does PANTONE 5535 look like on uncoated paper?
- Softer, duller and a touch lighter than the coated chip. Uncoated fibres absorb the ink instead of letting it sit on a sealed surface, so saturation drops across the board. The uncoated swatch here is modelled from the coated approximation — order a printed sample before you sign off.
- Can you print PANTONE 5535 on dark or coloured stock?
- Not as a standard ink hit. PANTONE 5535 is translucent, so on dark stock the paper colour comes through and the result is tone-on-tone. For this colour on dark paper we foil stamp or run an opaque screen instead.
- Can PANTONE 5535 be matched in CMYK?
- Sometimes. A process build is usually acceptable inside imagery or small type and usually visible on a large flat solid or a brand mark. If this is your brand colour, keep it a spot.
PANTONE® is a registered trademark of Pantone LLC. Print Peppermint is not affiliated with or endorsed by Pantone LLC. Codes are referenced to identify the inks we print.
Pairs beautifully with
Three combinations that hold up on press. Open one and the Studio starts with the stock, the foil and the ink already locked in.
PANTONE 5535 on Colorplan Bitter Chocolate
PANTONE 5535 on Colorplan Bitter Chocolate. Ink is translucent: on a bitter chocolate sheet the printed colour shifts toward the paper. Sign off against a printed sample, not the chip.
Compatibility matrix
Start this combination
PANTONE 5535 on Constellation Jade E21 Silk emboss
PANTONE 5535 on Constellation Jade E21 Silk emboss. Uncoated fibres drink the ink, so expect it a step softer than the coated chip — that softness is the reason to do it.
Compatibility matrix
Start this combinationPANTONE 5535 on 16pt
PANTONE 5535 on 16pt. Uncoated fibres drink the ink, so expect it a step softer than the coated chip — that softness is the reason to do it.
Compatibility matrix
Start this combination